ZTE ZXDSL 831AII MODEM DRIVERS FOR WINDOWS 7

Click Apply, It will take a moment to apply your settings. Reset your modem again and try it. Create 3 folders – C: I assume that your modem local ip address is Click System on Left hand side and click the sub title Reset and Restart. Again new window will appear, here you will see four option but you have to select either ppp over Ethernet or bridging. Originally Posted by meghama.

Uploader: Vobei
Date Added: 7 May 2012
File Size: 54.72 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92390
Price: Free* [*Free Regsitration Required]

I remember checking a friend’s connection and found that he had connected the line out on the other side of the splitter to his modem.

Without checking the check box Reset to factory default settings, click Restart directly to get your modem reboot, after the modem gets rebooted, you are ready to use your internet connection without using dialer. On the last window click on apply. Session established by should be marked as Always on, Zte zxdsl 831aii modem Next.

Type user name as admin and password as admin and click on OK Button. How to speed up your external USB Hard drives in windows moeem. If possible, find the diagnostic test section in zte zxdsl 831aii modem Modem Web menu and run it to see which part failed. You subscribe to Jaring,Streamyx,TimeNet and connect all to your local network.

Recent Drivers  SB0680 DRIVERS DOWNLOAD

BSNL ADSL Modem Configuration: ZTE ZXDSL 831AII (Type-1)

For customers using dialer for broadband 1. All of the 3 cases above, involves explicitly telling the network how to direct certain traffic to a certain ip address static ip routing is one of the methods.

This is a private Zxdsp address and cannot be traced. D ok that clears the zte zxdsl 831aii modem.

zte zxdsl 831aii modem I do not have a ZTE modem, so I can’t really help you there. But you don’t need to make static routing protocol for each IPs I mean dependentlyZTE routing is automatically set up on Hi, from your description; all you need is One default ip route definition, since there is only 1 WAN link to the internet and you have only 1 Local subnet.

Results 1 to 17 of Without checking the check box Reset to factory default settings, click Restart directly to zte zxdsl 831aii modem your modem reboot, after the modem gets rebooted, connect your broadband by using the Dialer on your desktop.

Share to Twitter Share to Facebook. Again new window will appear, here you will see four option but you have to select either ppp over Ethernet or bridging. Add Thread to del.

ZXDSL II – ZTE Corporation

I dont think the problem is with the username More likely that your modem couldnt get the ‘handshake’ with the DSLAM Your operational status should lit GREEN eventhough not connected to the net if im not mistaken try checking your zte zxdsl 831aii modem, phone line etc. Newer Post Older Post Home. Try and get PC1 and PC2 to ping the modem ; then check to see if you can reach some internet sites. I assume that your modem local ip address is If it’s blinking means something wrong with zte zxdsl 831aii modem line.

Recent Drivers  VEC INFINITY IN USB 1 DRIVERS FOR WINDOWS 7

On the left hand side, click on system click reset and restart. Open the Internet Explorer, type It will take a moment to apply your settings. Configuration – ZTE Step You can start testing, using some arbitary high port number say Usefull Internet Explorer Shortcuts.

The window for “Configure Broadband User Name and Password” will be opened, give the following details. I also assume that your local subnet mask is This method is easier.

Last edited by meghama; 10th June at Here are some useful windows XP Shortcuts: