I believe that most systems still use serial ports for this purpose. This made the debugging process more pleasant and, at the same time, caused one serious problem. On the host machine, after the debugger start, the following record will be displayed in the Command window:. This entry was posted on Thursday, March 6th, at This made the debugging process more pleasant and, at the same time, caused one serious problem. Message 1 of 6. Then you would set your bus parameters to the bus, device, and function numbers of the eHCI controller in this example, 0.

Uploader: Sagami
Date Added: 26 March 2007
File Size: 28.92 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 52713
Price: Free* [*Free Regsitration Required]

EHCI Debug Port

To see the current settings, just run the second command line as it is shown below. We’d love to hear your thoughts.

The motherboard of one of the machines may not have the built-in fireware interface. This cable is not a standard USB 2.

Pro Building Reactive Debkg. After the WinDbg start, do the following: The direction of the dongle is important; one side powers the device, and the other side does not. I setup the target according to the windbg help doc.

In response to this copy, the tool returns a resulting GUID of the copy. This ajays usb 2.0 debug cable is intended for drivers and low level software developers for Windows. You CAN get mini-PCIe cards, which on some laptops and modern motherboards which allows debugging via a speedy link. Message 6 ddbug 6.


OSR’s ntdev List: USB2 Ajays debug cable case

Clicking OK, the WinDbg command window should display the text highlighted in red below and wait for the connect completion. This, in its turn, increases the chance that when the hard-to-detect bug appears, we will be able to use modern debugging facilities for its removal.

Serial ports have been the primary means of early debugging of new coreboot ports. To configure these settings, use the following command line. You need to use a special USB 2. You can find these cables ajays usb 2.0 debug cable an Internet search for “USB 2.

Your experience is identical to that of most Windows devs. It needs to be plugged into a 2.

After the appearance of the firewire interface, the data transfer speed increased notably. Disappointing story on memory optimization. Both computers were connected with the null modem cable via the ajays usb 2.0 debug cable port. In a case like this, you might still be able to establish kernel-mode debugging over a USB 2.

Mathew D 7-Jul 2: If your controller isn’t already listed below then please add it or send an email to the mailing list if you don’t have a wiki account yet and want one, or want us to add your controller to the page. Ajays usb 2.0 debug cable i use such cable?: After some time, if all actions described above were performed correctly, the service information will be displayed in the debugger Command window as in Figure 8.


Setting Up Kernel-Mode Debugging over a USB 2.0 Cable Manually

Before using bcdedit to change boot information you may need to temporarily suspend Windows security features such as BitLocker and Secure Boot on the test PC. The ajays usb 2.0 debug cable can be used in both directions, but only one side provides power for the circuit. Thus Debyg must have to use USB ajays usb 2.0 debug cable only. Do you already have an account? Do not even attempt to use USB 2 debugging unless there is absolutely, positively, completely, and totally no alternative.

This made the debugging process more pleasant and, at the same time, caused one serious problem. Posts To This List: On the figure above, pay attention to the USB target name field that has the debug value.